how-to retube an earmold

STEP-BY-STEP INSTRUCTIONS

Supplies

  REAMER TOOL

Cement (acrylic for hard molds, silicone for soft molds)

Preformed TubE

Tube Puller

Scissors

Alcohol pad or disinfectant wipe

You may also need a tube expander to stretch the tube when reattaching it to the

hearing aid. If you are uncertain whether you need a tube expander, please contact

the earmold lab or your hearing aid manufacturer before removing the old tubing. 

  • step-by-step instructions

    STEP 1

    Run the earmold under hot water.

  • step-by-step instructions, tube

    STEP 2

    Remove old tubing with a smooth, gentle motion. Do not pull hard or tug. Excessive force could rip the tubing.

  • step-by-step 3

    STEP 3

    Remove any tubing bits from inside the hole, using a tubing reamer.

  • step-by-step, instructions 4

    STEP 4

    Apply cement inside the hole of the earmold.

  • step-by-step, instructions 5

    STEP 5

    Thread tube puller through the hole. Place the tip of the quilled end of the tube through the loop.

  • step-by-step, instructions 6

    STEP 6

    Pull firmly until the tubing is through the earmold. Then position for comfort.

  • step-by-step, instructions 7

    STEP 7

    Carefully cut the tube as close to the earmold as possible.

  • step-by-step, instructions 8

    STEP 8

    Wipe earmold with a disinfectant cloth, and reattach to hearing aid.